Work light / inspection light
9 published entries.
Entry001
Preparing and Repainting Cedar Siding
An inspection-led guide to cedar siding and shakes: diagnosing peeling, agreeing repairs, cleaning and removing failed coating, confirming dryness, priming, spraying an exterior acrylic finish, and inspecting the result.
Entry002
Preparing and Painting New Drywall
A good new-drywall paint job begins before the primer goes on. Identify the finish, inspect the entire job, and resolve the preparation work. Then keep inspecting as each stage is completed.
Entry003
Repainting Previously Painted Interior Walls
An interior repaint starts with the condition of the existing room: investigate damage, remove what is failing, repair and clean the surface, spot-prime where needed, and apply two finish coats. Sound existing paint does not automatically require a full coat of primer.
Entry004
Interior Painting Techniques and Guidelines for a Paint Crew
The method I teach my crew: protect the room, establish a station, work from the top down, keep tools loaded, paint into the wet, and inspect throughout. Includes the second-coat caulk seal on the tape edge and how it differs from manufacturer directions.
Entry010
Refinishing Cabinets with Painted Finishes
A practical painted-cabinet workflow covering cleaning, repairs, grain filling, coating-system choices, spraying, finaling, handling, and touch-ups. Field methods are distinguished from product instructions, with spray-area planning based on cited official requirements and manufacturer directions.
Entry011
Refinishing Cabinets with Stain and Clear Finishes
A cabinet-refinishing guide to stripping and restaining, darkening a sound finish, matching repair color and grain, applying compatible clear coats, and checking the installed result. Includes first-person field practice and separate manufacturer directions.
Entry 012
Diagnosing and Correcting Paint Flashing
Troubleshoot flashing, uneven paint, and a blotchy finish on painted vinyl siding and interior walls. Learn to level repairs, match texture, correct cut-in bands, repaint corner to corner, and inspect the dried result.
Entry013
Removing Wallpaper and Preparing the Wall for Paint
A steam-first wallpaper-removal process covering test areas, scoring, adhesive cleanup, drying, damaged drywall facing, patching, full-wall priming, and the final repaint. Includes the limited paint-over exception and separately sourced manufacturer directions.
Entry014
Preparing and Painting Interior Doors and Trim
An interior door and trim repainting guide covering existing-finish assessment, hardware protection, cleaning, feathering, filling, spot-priming, applicator selection, two finish coats, run correction, and careful reassembly. Includes product-specific drying times and the distinction between dry-to-touch and resistance to sticking.