Remove failed coating
7 published entries.
Entry001
Preparing and Repainting Cedar Siding
An inspection-led guide to cedar siding and shakes: diagnosing peeling, agreeing repairs, cleaning and removing failed coating, confirming dryness, priming, spraying an exterior acrylic finish, and inspecting the result.
Entry003
Repainting Previously Painted Interior Walls
An interior repaint starts with the condition of the existing room: investigate damage, remove what is failing, repair and clean the surface, spot-prime where needed, and apply two finish coats. Sound existing paint does not automatically require a full coat of primer.
Entry007
Preparing and Repainting Rusted Steel and Iron
Rust treatment begins with the condition of the metal, not the choice of paint. Establish that the component can remain in service, remove failed material, and build a compatible coating system on a properly prepared surface. Inspection at each stage prevents roughness, missed areas, and poor coverage from carrying through to the finished work.
Entry008
Preparing and Painting Exterior Aluminum
A smooth aluminum finish begins with removing corrosion products, preparing the remaining coating, and choosing a compatible primer and finish. This entry records my workflow for exterior aluminum and keeps it distinct from the rust-conversion methods used on steel and iron.
Entry014
Preparing and Painting Interior Doors and Trim
An interior door and trim repainting guide covering existing-finish assessment, hardware protection, cleaning, feathering, filling, spot-priming, applicator selection, two finish coats, run correction, and careful reassembly. Includes product-specific drying times and the distinction between dry-to-touch and resistance to sticking.
Entry015
Preparing and Painting Exterior Wood Trim and Fascia
An exterior wood trim and fascia guide covering firmness checks, repair or replacement, mildew cleaning, failed-paint removal, localized filler repairs, wood primer, caulking, and two satin acrylic finish coats. Final inspection emphasizes seams, edges, and complete coverage of exposed wood.
Entry 016
Preparing and Staining Exterior Wood Decks
Prepare and stain wood decks, from replacing unsound boards and identifying old finishes to cleaning, brightening, moisture checks, and full-board application. Separate instructions cover water-based deck stains and wiping excess oil from Ipe, with project photographs and maintenance guidance.