Holiday
Sense: paint coverage
Also: holidays, missed spot, missed spots
An area unintentionally left uncoated during painting or coating application.
In use
During the final cedar inspection, check for uneven coverage, missed spots (holidays), and tannin bleed-through.
History
Nautical use referring to areas missed during ship coating is documented in discussions of eighteenth-century usage. Avoid claiming a precise first invention date without a primary historical citation.
Where it is used
Entry 015Preparing and Painting Exterior Wood Trim and Fascia
- 9. E / Execution: Inspect the finish, seams, and exposed edges
Field practiceI look for runs, holidays, roller marks, and uneven areas. I pay particular attention to gaps and seams, making sure the caulking is smooth and secure and that paint has fully covered the wood to protect it from the elements.
- 9. E / Execution: Inspect the finish, seams, and exposed edges
Entry 012Diagnosing and Correcting Paint Flashing
- 4. Vinyl siding: inspect after drying and as the light changes
Inspect for holidays, raised lines, runs, and uneven sheen.
- 4. Vinyl siding: inspect after drying and as the light changes
Entry 016Preparing and Staining Exterior Wood Decks
- 9. Inspect the finish and explain when the deck can be used
Look for uneven application, lap lines, pools, sticky-looking excess, and holidays.
- 9. Inspect the finish and explain when the deck can be used
Entry 001Preparing and Repainting Cedar Siding
- 7. Inspect and correct the finish
After drying, inspect for uneven coverage, missed spots (holidays), flashing, and tannin bleed-through. Assess the complete area and transitions, not only the center of the siding boards.
- 7. Inspect and correct the finish
Entry 002Preparing and Painting New Drywall
- E / Execution / Final check: Walk the job with a light
After the second finish coat dries, I walk the job with a work light. I look for missed spots, uneven cut-ins, roller marks, flashing, and differences in sheen. Satin and semi-gloss deserve particular attention.
- E / Execution / Final check: Walk the job with a light
Entry 005Airless Spraying: Setup, Tip Selection, Application, and Cleanup
- 6. Coordinate the crew and correct wet defects
The helper watches for runs, excess paint, holidays, and bubbles, and checks surrounding surfaces for overspray.
- 6. Coordinate the crew and correct wet defects
Entry 007Preparing and Repainting Rusted Steel and Iron
- 6. Apply the finish evenly
Inspect during application for holidays and runs, then inspect the dry finish for evenness, complete coverage, and appearance before considering the work complete.
- 6. Apply the finish evenly
Entry 008Preparing and Painting Exterior Aluminum
- 6. Inspect coverage and finish quality
Use the same inspection discipline as on steel and iron: look for uniform appearance, holidays, runs, and complete coverage.
- 6. Inspect coverage and finish quality